Setting hazard indicator and horn mode

This vehicle is set in hazard indicator and horn mode when you first receive the vehicle.

In hazard indicator and horn mode, when the LOCK hazard button 1 is pushed, the hazard indicator flashes twice and the horn chirps once.

When the UNLOCK pushed, button 2 is pushed, the hazard indicator flashes once.

If the horn chirp is not necessary, you can switch to hazard indicator only mode by following the switching procedure.

In hazard indicator only mode, when the LOCK indicator button is pushed, the hazard indicator flashes twice. When the UNLOCK button is button is pushed, neither the hazard indicator nor the horn operates.

Switching procedure:

Switching procedure:

To switch the hazard indicator and horn operation, push the LOCK 1 and UNLOCK 2 buttons on the keyfob simultaneously for more than 2 seconds.

- When the hazard indicator mode is set, the hazard indicator flashes 3 times.

- When the hazard indicator and horn mode is set, the hazard indicator flashes once and the horn chirps once.

Intelligent Key system (if so equipped)

    See also:

    Battery
    ● Keep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. ● Make certain the terminal connections are clean and securely tightened. χ ...

    Accelerator downshift
    — in D position — For passing or hill climbing, depress the accelerator pedal to the floor. This shifts the transmission down into a lower gear, depending on the vehicle speed. High fluid tem ...

    Seats
    Seats - Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it ...