Using the system

Initialization

When the ignition switch is placed in the ON position, NISSAN Voice Recognition is initialized, which takes a few seconds. When completed, the system is ready to accept voice commands. If the switch is pressed before the initialization completes, voice commands will not be accepted. Please wait until the NISSAN Voice Recognition initialization is completed.

    See also:

    Checking engine coolant level
    MR20DE Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level B , add coolant to the MAX level A . If the reservoir is empty, check the ...

    Console box
    Upper half Pull up on the drivers side latch to open the upper half of the console box. The upper half of the console box may be used for storage of cellular phones. An access hole is provid ...

    Air cleaner
    The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance log shown in the NISSAN Service and Maintenance Guide.When replacing the filter, wipe the ins ...