Locking doors

1. Place the ignition switch in the LOCK position.

1. Place the ignition switch in the LOCK position.
2. Close all doors.
3. Press the Intelligent button on the Intelligent Key.
4. The hazard warning lights flash twice and the horn beeps once.
5. All doors will be locked.

CAUTION

After locking the doors using the Intelligent Key, be sure that the doors have been securely locked by operating the door handles.

    See also:

    Removing wheel cover (if so equipped)
    Never use your hands to remove the wheel cover. This may cause personal injury. To remove the wheel cover, use the jack rod 1 as illustrated. Apply cloth 2 between the wheel and jack rod ...

    Drive belt
    MR20DE model 1. Automatic tensioner 2. Generator 3. Water pump 4. Air conditioner compressor (with A/C) or Idler pulley (without A/C) 5. Crankshaft pulley QR25DE model 1. Crankshaft p ...

    Engine compartment
    CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not ...