Manual operation
Fan speed control
Turn the fan speed control dial to manually control the fan speed.
Push the AUTO button to return to automatic control of the fan speed.
Air recirculation
Push the air recirculation button to recirculate interior air inside the vehicle. The indicator light on the button will come on.
The air recirculation cannot be activated when the air conditioner is in the front defrosting mode or the front defrosting and foot outlet mode.
Fresh air intake
Push the fresh air intake button to draw outside air into the passenger compartment.
The indicator light on the button will come on.
Automatic intake air control
In the AUTO mode, the intake air will be controlled automatically. To manually control the intake air, push the air recirculation button.
To return to the automatic control mode, push and hold the air recirculation button or push and hold the fresh air intake button for about 2 seconds. The indicator lights (both air recirculation and fresh air intake buttons) will flash twice, and then the intake air will be controlled automatically.
Air flow control
Pushing the MODE button manually controls air flow and selects the air outlet:
- Air flows from center and side vents.
- Air flows from center and side vents and foot outlets.
- Air flows mainly from foot outlets.
- Air flows from defroster and foot outlets.
- Air flows from defroster outlets.
To turn system off
Press the OFF button.
See also:
Terms
It is important to familiarize yourself with
the following terms before loading your
vehicle.
● Curb Weight (actual weight of your
vehicle) - vehicle weight including.
standard and optio ...
Anti-lock Braking System (ABS)
WARNING
● The Anti-lock Braking System (ABS) is a
sophisticated device, but it cannot prevent
accidents resulting from careless
or dangerous driving techniques. It can
help maintain vehicle ...
Battery
If the battery is not fully charged during
extremely cold weather conditions, the battery
fluid may freeze and damage the battery. To
maintain maximum efficiency, the battery should
be checked ...