Air conditioner operation

The air conditioner system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the air conditioner system due to the lack of lubrication.

Cooling:

This mode is used to cool and dehumidify the air.

1. Push the air recirculation button to the to the OFF position. (The indicator light turns off.) 2. Turn the air flow control dial to the position. position.

3. Turn the fan speed control to the dial to the desired position.

4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the cool (left) position.

- For quick cooling when the outside temperature is high, push the air recirculation button to to the ON position. Be sure to push the air recirculation button to the OFF position for normal cooling.

- A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.

Dehumidified heating:

This mode is used to heat and dehumidify the air.

1. Push the air recirculation button to the to the OFF position. (The indicator light turns off.) 2. Turn the air flow control dial to the position. position.

3. Turn the fan speed control to the dial to the desired position.

4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Turn the temperature control dial to the desired position between the middle and the hot (right) position.

Dehumidified defogging:

This mode is used to defog the windows and dehumidify the air.

1. Turn the air flow control dial to the position. position.

2. Turn the fan speed control to the dial to the desired position.

3. Push the A/C button on. (The A/C indicator light will illuminate.) 4. Turn the temperature control dial to the desired position.

    See also:

    Frontier in the Market
    The Frontier is the right-size truck for an urban environment, and with the available V-6 engine it offers decent capability, too, with a large 6,500-pound maximum towing capacity and a 1,541-poun ...

    Using the interior light
    Press the button on the keyfob once to turn on the interior lights. For additional information, refer to “Interior light” in the “Instruments and controls” section in this manual. ...

    Checking engine oil level
    1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. Turn off the engine. Wait more than 10 minutes for the oil to ...