Dehumidified defogging

This mode is used to defog the windows and dehumidify the air.

1. Turn the air flow control dial to the position. position.

2. Turn the fan control dial to the desired position.

3. Push the button. The indicator light comes on.

When the the air conditioner automatically turns on (however, or  the air conditioner automatically turns on (however, position is selected, the air conditioner automatically turns on (however, the indicator light will not illuminate). In this position, the A/C cannot be turned off. When the air flow control is turned to any position other than   the A/C light will illuminate or  (the A/C will continue operating) and can be the A/C light will illuminate (the A/C will continue operating) and can be turned off using the A/C button. This dehumidifies the air which helps defog the windshield.

The automatically turns off, allowing mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance.

4. Turn the temperature control dial to the desired position.

    See also:

    Underbody
    In areas where road salt is used in winter, the underbody must be cleaned regularly. This will prevent dirt and salt from building up and causing the acceleration of corrosion on the underbody ...

    Exterior
    The Pathfinder's styling is considered an evolution of the previous version, with short overhangs and pronounced fender flares. The rear door handles are located vertically on the C-pillars, and t ...

    Operating the HomeLink universal transceiver
    The HomeLink Universal Transceiver (once programmed) may now be used to activate the garage door, etc. To operate, simply press the appropriate programmed HomeLink Universal Transceiver button ...