Dehumidified defogging
This mode is used to defog the windows and dehumidify the air.
1. Press the 
air flow control
button.
2. Turn the fan control dial to the desired position.
● When the or
are selected, the
air conditioner automatically turns on (the
indicator light will illuminate) if the outside
temperature is more than 36°F (2°C). This
dehumidifies the air which helps defog the
windshield. The 
mode automatically
turns off, allowing outside air to be drawn
into the passenger compartment to further
improve the defogging performance.
3. Turn the temperature control dial to the desired position.
See also:
Trip computer
To operate the trip computer, use the A
switch.
When the ignition switch is in the ON position,
modes of the trip computer can be selected by
pushing the switch A briefly.
Each time the ...
Operating tips
Clear snow and ice from the wiper blades
and air inlet in front of the windshield. This
improves heater operation. ...
Heater operation
Heating
This mode is used to direct heated air to the foot
outlets. Some air also flows from the defrost
outlets and the side vent outlets.
1. Press the button to the OFF
position
for normal h ...