Windshield wiper blades. Cleaning
If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield.
Clean the outside of the windshield with a washer solution or a mild detergent. Your windshield is clean if beads do not form when rinsing with clear water.
Clean each blade by wiping it with a cloth soaked in a washer solution or a mild detergent. Then rinse the blades with clear water. If your windshield is still not clear after cleaning the blades and using the wiper, replace the blades.
CAUTION:
Worn windshield wiper blades can damage the windshield and impair driver vision.
See also:
Alarm and warning when the engine starts
When the Intelligent Key system warning light
( ) blinks red and the outside buzzer
sounds, make sure the Intelligent Key is inside the
vehicle. ...
Audio main operation
Place the ignition switch in the ACC or ON
position. Then, push the button repeatedly
to switch to the iPod® mode.
If the system has been turned off while the iPod®
was playing, pushing the O ...
Brake and clutch (if so equipped) fluid
For further brake and clutch fluid specification
information, refer to “Capacities and recommended
fuel/lubricants” in the “Technical and
consumer information” section of this manual.
...