Operations after activation
- When the rear view is displayed on the left side on the screen (B or C ), the view on the right side switches between the bird’seye view B and the front-side view C each time the CAMERA button is pushed (3 ).
- When the front view/bird’s-eye view D is displayed on the screen, pushing the CAMERA button (9 ) will switch the view on the right side to the front-side view E .
When the CAMERA button is pushed again (10 ), the screen which was displayed before the Around View Monitor was activated A is displayed.
- The view on the driver’s side switches to the rear view (B or C ) when the selector lever is shifted into the “R” (Reverse) position (5 or 7 ).
The view will switch back to the front view (D or E ) when the selector lever is shifted out of the “R” (Reverse) position (4 or 6 ).
See also:
Exterior
I find the Sentra peculiar-looking, but you can form your own opinion. As for
the SE-R and SE-R Spec V variants, they have unique side sill extensions and
deeper front and rear bumpers to match. A ...
Locking doors
Locking doors
1. Close all windows.
2. Remove the key from the ignition switch.
3. Close the hood, trunk lid, and all doors.
4. Press the button on the keyfob. All
the doors lock. The hazard ...
Trip computer (if so equipped)
When the ignition switch is placed in the ON
position, modes of the trip computer can be
selected by pushing the trip computer change
button on the instrument panel located near the
speedomete ...