Locking doors

1. Turn the ignition switch to the LOCK position.1

2. Carry the Intelligent Key with you.

3. Close all the doors.2

4. Push the LOCK the button 1 on the Intelligent Key.

5. All the doors and the lift gate will lock.

6. The hazard indicator flashes twice and the horn chirps once.

1: Doors will lock with the Intelligent Key while the ignition switch is in the ACC or ON position.

2: Doors will not lock with the Intelligent Key while any door is open.

Operate the door handles to confirm that the doors have been securely locked.

    See also:

    Clearing the programmed information
    Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds) ...

    Setting hazard indicator and horn mode
    This vehicle is set in hazard indicator and horn mode when you first receive the vehicle. In hazard indicator and horn mode, when the LOCK button 1 is pushed, the hazard indicator flashes tw ...

    Maximum Gross Vehicle Weight (GVW)/Maximum Gross Axle Weight (GAW)
    The GVW of the towing vehicle must not exceed the Gross Vehicle Weight Rating (GVWR) shown on the F.M.V.S.S./C.M.V.S.S. certification label. The GVW equals the combined weight of the unloade ...