Operating tips
● Say a command after the tone. Voice commands
cannot be accepted when the icon
is .
● If the command is not recognized, the system
repeats the announcement. Repeat the
command in a clear voice.
● Press the switch on the steering
wheel to return to the previous screen.
● If you want to cancel the command, press
and hold the switch. The message,
“Voice cancelled” will be announced.
● If you want to adjust the volume of the system
feedback, push the volume control
switch on the steering wheel or use the
audio system volume knob while the system
is making an announcement.
● To minimize the amount of prompts spoken
by the system in Alternate Command Mode,
use the Minimize Voice Feedback function.
To access the Minimize Voice Feedback
function press the SETTING button, then
select the “Others” key. Then select the
“Voice Recognition” key.
See also:
To protect your vehicle from corrosion
● Wash and wax your vehicle often to keep the
vehicle clean.
● Always check for minor damage to the paint
and repair it as soon as possible.
● Keep drain holes at the bottom of t ...
Electric moonroof
Electric moonroof
This moonroof only operates with the ignition
switch placed in the ON position.
NOTE:
If the battery is discharged or is disconnected,
the moonroof may not operate correctl ...
Windshield wiper blades. Replacing
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
2. Push the release tab, then move the wiper
blade down the wiper arm to remove.
3. Remove the wiper bla ...