Interior light

Interior light
Interior light

The interior light has a three-position switch and operates regardless of ignition switch position.

When the switch is in the ON position 1 , the interior light illuminates, regardless of door position.

When the switch is in the center O position, the interior light illuminates by opening a door.

The interior light will stay on for about 30 seconds when.

● The doors are unlocked while the ignition switch is placed in the OFF position and all doors are closed.

● The driver’s door is opened and then closed while the ignition switch is placed in the OFF position.

● The ignition switch is placed in the OFF position while all doors are closed.

The interior light will turn off while the 30 second timer is activated when.

● The driver’s door is locked by the keyfob, a key or the lock-unlock switch.

● The ignition switch is placed in the ON position.

When the switch is in the OFF position 2 , the interior light does not illuminate, regardless of door position.

Some vehicles are equipped with a battery saver feature that will automatically turn off the interior lights after approximately 15 minutes if.

● doors are open, or
● the interior light switch is in the ON position.

NOTE:
If the interior lights are turned off automatically by the battery saver feature, the ignition switch must be placed in the ON position before the interior lights will illuminate again.

For information regarding the interior light bulb replacement, refer to “Exterior and interior lights” in the “Maintenance and do-it-yourself” section of this manual.

Do not use for extended periods of time

Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.

    See also:

    Auto-reverse function (when closing or tilting down the moonroof)
    The auto-reverse function can be activated when the moonroof is closed or tilted down by automatic operation when the ignition switch is placed in the ON position or for about 45 seconds after the ...

    Automatic operation
    Cooling and/or dehumidified heating (AUTO) This mode may be used all year round as the system automatically works to keep a constant temperature. Air flow distribution and fan speed are also co ...

    Jump starting
    If jump starting is necessary, see Jump starting in the In case of emergency section of this manual. If the engine does not start by jump starting, the battery may have to be replaced. Contact ...